Lexmark T652n Manual

The Lexmark T652n is a high-performance monochrome laser printer designed for small to medium-sized workgroups. It offers fast printing speeds, high-quality output, and a range of connectivity options, including Ethernet and USB. This manual provides essential information on features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Printing Documents 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: High-speed printing, automatic duplexing, network connectivity, and a user-friendly interface.

Feature	Description
Print Speed	Up to 50 pages per minute
Print Resolution	1200 x 1200 dpi
Duplex Printing	Automatic double-sided printing
Connectivity	USB 2.0, Ethernet, and optional wireless
Paper Capacity	Standard 250-sheet input tray
Monthly Duty Cycle	Up to 150,000 pages

Installation

Unpack the printer and place it on a stable surface. Follow the steps below for installation.

Connect the power cord and plug it into an outlet.
Connect the printer to your network using an Ethernet cable or USB cable.
Install the toner cartridge and load paper into the tray.
Power on the printer.

WARNING! Ensure the printer is on a flat surface to avoid tipping.

First-Time Setup

Follow the on-screen prompts to configure your printer settings.

Select your language and region.
Connect to your network if using wireless.
Print a test page to confirm setup.

CAUTION! Do not connect the USB cable until prompted by the installation software.

Specifications

Print Technology: Laser.
Print Speed: Up to 50 ppm.
Print Resolution: 1200 x 1200 dpi.
Connectivity: USB 2.0, Ethernet, optional wireless.
Memory: 256 MB standard, expandable.
Dimensions: 15.5 x 17.5 x 12.5 inches.
Weight: Approximately 50 lbs.

Controls and Settings

Access printer settings through the control panel. Use the buttons to navigate menus and configure options.

Control Panel: Power, Cancel, and Navigation buttons.

Connecting Devices

Connect your printer to computers or networks using the appropriate cables.

Ensure the printer is powered off before connecting.
Use the USB or Ethernet port to connect to your device.
Power on the printer and install necessary drivers on your computer.

Tip: Use the latest drivers from the Lexmark website for optimal performance.

Printing Documents

Follow these steps to print documents from your computer.

Select the document you wish to print.
Choose 'Print' from the file menu.
Select the Lexmark T652n from the printer list.
Adjust settings as needed and click 'Print'.

WARNING! Ensure there is enough paper in the tray before printing.

Maintenance

Regular maintenance is essential for optimal performance.

Replace toner cartridges as needed.
Clean the printer exterior with a soft cloth.
Perform regular print head cleaning through the printer settings.

Regulatory Information

This printer complies with FCC regulations and is certified for safety and environmental standards.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Printer not responding	Power or connection issue	Check power supply and connections.
Poor print quality	Low toner or dirty drum	Replace toner or clean the drum.
Paper jams	Incorrect paper loading	Remove jammed paper and reload correctly.
Network issues	Connection problem	Check network settings and cables.

Reset: Refer to the user manual for reset instructions.

Support: Visit www.lexmark.com or contact customer support for assistance.