Lexmark E460dn Service Manual

The Lexmark E460dn is a monochrome laser printer designed for high-volume printing with advanced features. It offers fast print speeds, automatic duplex printing, and a variety of connectivity options including USB and network printing. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Printing Documents 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: High-speed monochrome printing, automatic duplexing, network connectivity, and a user-friendly interface.

Feature	Description
Print Speed	Up to 40 pages per minute
Duplex Printing	Automatic double-sided printing
Connectivity	USB, Ethernet, and wireless options
Paper Capacity	Standard 250-sheet input tray
Monthly Duty Cycle	Up to 80,000 pages
Display	2-line LCD for easy navigation

Installation

Unpack and inspect contents. Place the printer on a stable surface.

Connect the power cable and plug it into an outlet.
Connect to your computer or network using USB or Ethernet.
Load paper into the input tray.
Install the toner cartridge.

WARNING! Ensure the printer is placed on a flat surface to avoid tipping.

First-Time Setup

Power on the printer and follow the on-screen prompts to configure settings.

Select language and region settings.
Connect to your network if using wireless.
Print a test page to confirm setup.

CAUTION! Ensure all connections are secure before powering on.

Specifications

Print Technology: Laser.
Print Resolution: Up to 1200 x 1200 dpi.
Processor Speed: 800 MHz.
Memory: 256 MB standard, expandable to 512 MB.
Supported Media Sizes: Letter, Legal, A4, A5, Custom sizes.
Power Consumption: 400 watts (maximum).
Dimensions: 15.4 x 14.5 x 10.5 inches.

Controls and Settings

Access printer settings via the control panel. Use the LCD display to navigate through options.

Buttons: Power, Cancel, Menu, and Navigation arrows.

Settings include print quality, paper type, and network configuration.

Connecting Devices

Connect the printer to your computer or network using the appropriate cable.

Turn off the printer and the device before connecting.
Use a USB cable for direct connection or Ethernet for network.
Follow the installation prompts on your computer.

Tip: Ensure the printer is powered on during setup.

Printing Documents

To print, select the printer from your device's print menu.

Choose the document you wish to print.
Select print settings (e.g., number of copies, duplex).
Click print and wait for the job to complete.

WARNING! Do not open the printer while printing.

Maintenance

Regular maintenance ensures optimal performance.

Replace toner cartridges as needed.
Clean the printer exterior with a dry cloth.
Run maintenance routines from the printer menu.

CAUTION! Always unplug the printer before performing internal cleaning.

Regulatory Information

This printer complies with FCC regulations and is certified for safety and environmental standards.

For support, visit www.lexmark.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Printer not responding	Power or connection issue	Check power supply and connections.
Poor print quality	Toner low or dirty	Replace toner or clean printer.
Paper jams	Incorrect paper loading	Remove jammed paper and reload correctly.
Network issues	Connection problem	Check network settings and cables.

Reset: Use the reset option in the menu if available.

Service: 1-800-LEXMARK; www.lexmark.com