Lexmark E260 Service Manual

The Lexmark E260 is a monochrome laser printer designed for high-quality printing with a compact footprint. It features fast print speeds, a user-friendly interface, and various connectivity options. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Printing Documents 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: High-speed printing, user-friendly control panel, USB and network connectivity, energy-efficient design.

Feature	Description
Print Speed	Up to 30 pages per minute
Print Resolution	1200 x 1200 dpi
Memory	256 MB standard, expandable
Connectivity	USB 2.0, Ethernet, optional wireless
Duplex Printing	Automatic duplexing available
Paper Capacity	250-sheet input tray, 100-sheet output bin
Energy Star Certified	Energy-efficient operation

Installation

Unpack and inspect contents. Place on a stable surface.

Connect power cord: Plug into a power outlet.
Connect USB or network cable: Use appropriate port for connection.
Load paper: Adjust paper guides and load into the input tray.
Turn on the printer: Press the power button.

WARNING! Ensure the printer is on a stable surface to avoid tipping.

First-Time Setup

Power on the printer and follow the on-screen prompts.

Install toner cartridge: Open the front cover and insert the cartridge.
Load paper: Ensure paper is loaded correctly in the tray.
Configure network settings: Use the control panel to connect to Wi-Fi if applicable.
Print a test page: Verify installation by printing a test page.

CAUTION! Handle toner cartridges carefully to avoid spills.

Specifications

Print Technology: Monochrome laser.
Print Speed: Up to 30 ppm.
Print Resolution: 1200 x 1200 dpi.
Processor Speed: 400 MHz.
Memory: 256 MB standard, expandable to 512 MB.
Connectivity: USB 2.0, Ethernet, optional wireless.
Paper Handling: 250-sheet input tray, 100-sheet output bin.
Dimensions: 14.5 x 14.2 x 10.5 inches.
Weight: Approximately 20 lbs.
Power Consumption: 350 watts (maximum).

Controls and Settings

Access printer settings via the control panel. Key buttons include Power, Cancel, and Menu.

Menu Options: Print Quality, Paper Type, Network Settings, and Maintenance.

Connecting Devices

Connect via USB or network for printing. Ensure the printer is powered off during connections.

Turn off the printer and the device you are connecting.
Connect the USB or Ethernet cable to the appropriate ports.
Turn on the printer and the connected device.

Tip: Ensure the correct drivers are installed on your computer.

Printing Documents

To print documents, select the printer from your computer's print dialog.

Select the document you wish to print.
Choose the Lexmark E260 from the printer list.
Adjust print settings as needed.
Click Print to start the printing process.

WARNING! Ensure the printer has enough paper and toner before printing.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean the printer exterior with a soft cloth.
Replace toner cartridges as needed.
Run cleaning cycles to maintain print quality.
Check for paper jams regularly.

Regulatory Information

This printer complies with FCC regulations and is certified for safety and environmental standards. For support, visit www.lexmark.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Printer not responding	Power issue	Check power connection and turn on the printer.
Print quality issues	Toner low or dirty	Replace toner cartridge or clean the printer.
Paper jams	Incorrect paper loading	Remove jammed paper and reload correctly.
Network connection failure	Incorrect settings	Check network settings and reconnect.

Reset: Use the control panel to reset settings if necessary.

Service: For further assistance, contact Lexmark support.